• <tbody id="diriw"></tbody>

      <track id="diriw"></track>
      <bdo id="diriw"></bdo>
      <menuitem id="diriw"><dfn id="diriw"></dfn></menuitem>

        1. <track id="diriw"><div id="diriw"></div></track>
          <track id="diriw"><span id="diriw"></span></track>

        2. <nobr id="diriw"></nobr>

            1. 興啟塑膠
              興啟塑膠

              專業工程塑料、塑膠原料經營商

              全國服務熱線

              18925783032

              塑膠原料
              塑膠原料wap
              當前位置:塑料經營商 >> 產品展示 >> PC塑膠原料 >> PC1414 SABIC EXL1414/沙伯基礎(GE)耐候塑料
              PC1414 SABIC  EXL1414/沙伯基礎(GE)耐候塑料

              PC1414 SABIC EXL1414/沙伯基礎(GE)耐候塑料

              PC1414 SABIC EXL1414/沙伯基礎(GE)耐候塑料

              全國24小時銷售熱線:

              18925783032
              產品介紹

              PC1414 SABIC  物性資料

              • 規格用途

              • 規格級別其它 其它 其它外觀顏色
                該料用途
                備注說明
              • 技術參數

              • 性能項目試驗條件[狀態]測試方法測試數據數據單位
                物理性能密度
                ISO 11831.19g/cm
                成型收縮率-,水平方向
                0.4-0.8%
                -,垂直方向
                0.4-0.8%
                吸水率
                ISO 620.35%
                機械性能屈服拉伸強度
                ASTM D63855MPa
                拉伸強度
                ASTM D63850MPa
                斷裂伸長率
                ASTM D63898%
                屈服伸長率
                ASTM D6386%
                彎曲強度
                ASTM D79092MPa
                彎曲模量
                ASTM D7902230MPa
                洛氏硬度
                ASTM D785121R
                Izod缺口沖擊強度23℃ASTM D256865J/m
                -30℃ASTM D256774J/m
                電氣性能體積電阻率
                ASTM D257>1.E+15Ohm.cm
                表面電阻率
                ASTM D257>1.E+15Ohm
                相對電阻率100HzASTM D1502.68
                介電消散因子100HzASTM D1500.0012
                熱性能維卡軟化溫度
                ASTM D1525145
                熱變形溫度-,0.45MpaASTM D648139
                -,1.82MpaASTM D648124

              英文PC1414物性資料

              TYPICAL PROPERTIES (1)
              MECHANICALValueUnitStandard
              Tensile Stress, yld, Type I, 50 mm/min560kgf/cm2ASTM D 638
              Tensile Stress, brk, Type I, 50 mm/min510kgf/cm2ASTM D 638
              Tensile Strain, yld, Type I, 50 mm/min6%ASTM D 638
              Tensile Strain, brk, Type I, 50 mm/min98%ASTM D 638
              Tensile Modulus, 50 mm/min20500kgf/cm2ASTM D 638
              Flexural Stress, yld, 1.3 mm/min, 50 mm span940kgf/cm2ASTM D 790
              Flexural Modulus, 1.3 mm/min, 50 mm span22700kgf/cm2ASTM D 790
              Hardness, Rockwell L89-ASTM D 785
              Hardness, Rockwell R121-ASTM D 785
              Tensile Stress, yield, 50 mm/min57MPaISO 527
              Tensile Stress, break, 50 mm/min60MPaISO 527
              Tensile Strain, yield, 50 mm/min6%ISO 527
              Tensile Strain, break, 50 mm/min120%ISO 527
              Tensile Modulus, 1 mm/min2150MPaISO 527
              Flexural Stress, yield, 2 mm/min85MPaISO 178
              Flexural Modulus, 2 mm/min2250MPaISO 178
              IMPACTValueUnitStandard
              Izod Impact, notched, 23°C88cm-kgf/cmASTM D 256
              Izod Impact, notched, -30°C78cm-kgf/cmASTM D 256
              Instrumented Impact Total Energy, 23°C714cm-kgfASTM D 3763
              Izod Impact, unnotched 80*10*3 +23°CNBkJ/m2ISO 180/1U
              Izod Impact, unnotched 80*10*3 -30°CNBkJ/m2ISO 180/1U
              Izod Impact, notched 80*10*3 +23°C70kJ/m2ISO 180/1A
              Izod Impact, notched 80*10*3 -30°C60kJ/m2ISO 180/1A
              Charpy 23°C , V-notch Edgew 80*10*3 sp=62mm70kJ/m2ISO 179/1eA
              Charpy -30°C , V-notch Edgew 80*10*3 sp=62mm65kJ/m2ISO 179/1eA
              Charpy 23°C , Unnotch Edgew 80*10*3 sp=62mmNBkJ/m2ISO 179/1eU
              Charpy -30°C , Unnotch Edgew 80*10*3 sp=62mmNBkJ/m2ISO 179/1eU
              THERMALValueUnitStandard
              Vicat Softening Temp, Rate B/50145°CASTM D 1525
              HDT, 0.45 MPa, 3.2 mm, unannealed139°CASTM D 648
              HDT, 1.82 MPa, 3.2mm, unannealed124°CASTM D 648
              CTE, -40°C to 40°C , flow6.96E-051/°CASTM E 831
              CTE, -40°C to 40°C , xflow7.47E-051/°CASTM E 831
              CTE, 23°C to 80°C , flow7.2E-051/°CISO 11359-2
              CTE, 23°C to 80°C , xflow7.2E-051/°CISO 11359-2
              Ball Pressure Test, 125°C +/- 2°CPasses-IEC 60695-10-2
              Vicat Softening Temp, Rate B/50145°CISO 306
              Vicat Softening Temp, Rate B/120146°CISO 306
              HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm140°CISO 75/Be
              HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm128°CISO 75/Ae
              Relative Temp Index, Elec130°CUL 746B
              Relative Temp Index, Mech w/impact120°CUL 746B
              Relative Temp Index, Mech w/o impact125°CUL 746B
              PHYSICALValueUnitStandard
              Specific Gravity1.18-ASTM D 792
              Mold Shrinkage, flow, 3.2 mm0.4 - 0.8%SABIC Method
              Mold Shrinkage, xflow, 3.2 mm0.4 - 0.8%SABIC Method
              Melt Flow Rate, 300°C /1.2 kgf10g/10 minASTM D 1238
              Density1.19g/cm2ISO 1183
              Water Absorption, (23°C /sat)0.35%ISO 62
              Moisture Absorption (23°C / 50% RH)0.15%ISO 62
              Melt Volume Rate, MVR at 300°C /1.2 kg9cm3/10 minISO 1133
              ELECTRICALValueUnitStandard
              Volume Resistivity>1.E+15Ohm-cmASTM D 257
              Surface Resistivity>1.E+15OhmASTM D 257
              Dielectric Strength, in oil, 0.8 mm16.2kV/mmASTM D 149
              Relative Permittivity, 100 Hz2.68-ASTM D 150
              Relative Permittivity, 1 MHz2.64-ASTM D 150
              Dissipation Factor, 100 Hz0.0012-ASTM D 150
              Dissipation Factor, 1 MHz0.0093-ASTM D 150
              FLAME CHARACTERISTICSValueUnitStandard
              UL Recognized, 94HB Flame Class Rating (3)0.4mmUL 94
              Glow Wire Flammability Index 850°C , passes at0.8mmIEC 60695-2-12
              Glow Wire Flammability Index 960°C , passes at1mmIEC 60695-2-12
              Glow Wire Ignitability Temperature, 1.0 mm875°CIEC 60695-2-13
              Glow Wire Ignitability Temperature, 3.0 mm875°CIEC 60695-2-13
              Processing


              Parameter
              Injection MoldingValueUnit
              Drying Temperature120°C
              Drying Time3 - 4hrs
              Drying Time (Cumulative)48hrs
              Maximum Moisture Content0.02%
              Melt Temperature295 - 315°C
              Nozzle Temperature290 - 310°C
              Front - Zone 3 Temperature295 - 315°C
              Middle - Zone 2 Temperature280 - 305°C
              Rear - Zone 1 Temperature215 - 295°C
              Mold Temperature70 - 95°C
              Back Pressure0.3 - 0.7MPa
              Screw Speed40 - 70rpm
              Shot to Cylinder Size40 - 60%
              Vent Depth0.025 - 0.076mm


              相關產品

                久久久精品人妻av一区二区三区|久99久精品视频免费观看v|亚洲无码在线一区二区三区|久久亚洲国产欧美日韩
              • <tbody id="diriw"></tbody>

                  <track id="diriw"></track>
                  <bdo id="diriw"></bdo>
                  <menuitem id="diriw"><dfn id="diriw"></dfn></menuitem>

                    1. <track id="diriw"><div id="diriw"></div></track>
                      <track id="diriw"><span id="diriw"></span></track>

                    2. <nobr id="diriw"></nobr>